The following Macromedia® Flash™ videos are excerpts from the on-line HTML help web. Collected in one location for convenience, these videos provide an informal virtual classroom describing how to use the GoLogic™ logic analyzer.

Click on the underlined hyper-links to watch each movie in this browser window. Click on the icon to download each tutorial to your hard drive for later viewing. We recommend downloading the tutorials if a slow dial-up connection is used. Unzip the files to a temporary folder and click the HTM file to watch each tutorial.

Course overview	2:50 (min:sec)	1.5 MB
A brief summary of the topics covered in the video tutorials.
Quick example	3:40 (min:sec)	2 MB
A demonstration of configuring the GoLogic and capturing trace.
Logic analyzer basics
Logic analyzers vs. Oscilloscopes	2:47 (min:sec)	580 KB
Thresholds	1:54	430 KB
GoLogic setup steps
The Setup Wizard	3:19 (min:sec)	2.5 MB
The Setup Wizard is a great place for         beginners to start. The software leads         you through the 3 setup steps described         below in detail.
Step 1: Sampling
Timing vs. State Analysis	1:12 (min:sec)	250 KB
Normal timing	2:38	1.5 MB
Simple state	2:56	1.5 MB
Transitional timing	3:36	1.7 MB
4-Channel transitional timing	1:23	750 KB
Simple state with timestamp	2:29	1.4 MB
Simple state with multiple clocks	2:06	1 MB
Complex state	3:46	2.3 MB
Serial bus overview	6:09	3.8 MB
I2C timing	3:03	3.2 MB
I2C state	1:37	1 MB
SPI timing	6:27	7 MB
RS-232 timing	4:56	4.5 MB
CAN timing	4:10	3.9 MB
LIN timing	2:46	2.3 MB
Bitstream timing	8:19	5.8 MB
Step 2: Channels
Window areas	3:33 (min:sec)	2 MB
Creating channel groups	3:00	2.1 MB
Adding channels	4:56	2.6 MB
Bit-order	2:43	1.7 MB
Color	2:17	1.3 MB
Symbol tables	4:27	2.8 MB
Inverted logic vs. Active-low	5:31	1.4 MB

Step 3: Triggering
Window areas	2:12 (min:sec)	1 MB
Simple TriggerForm	4:27	2.4 MB
Series TriggerForm	2:52	1.4 MB
TimeBetween TriggerForm	3:46	2 MB
Custom TriggerForm	5:59	3.1 MB
Range trigger events	1:00	525 KB
Using symbols	2:56	1.8 MB
Selective storage	3:43	2.1 MB
I2C TriggerForm	2:05	1 MB
SPI TriggerForm	3:54	1.8 MB
Viewing the data
WaveForm window
Window areas	5:18 (min:sec)	3 MB
Window options	6:43	5 MB
Configuring lines for trace data	2:08	1.4 MB
Configuring lines for scope data	2:42	1.7 MB
Configuring lines for serial bus conversion	3:00	2.5 MB
TriggerForm editing	5:58	3.6 MB
Using the data markers	3:43	2.4 MB
Zooming tricks	3:42	2.3 MB
Dual windows	2:25	1.6 MB
Numeric window
Window areas	2:17 (min:sec)	1.3 MB
Window options	3:00	2.4 MB
Configuring columns for trace data	3:07	2.2 MB
Configuring columns for timestamp	1:13	760 KB
Dual windows	1:20	1.2 MB
Plug-Ins
Plug-In Manager	5:46 (min:sec)	4.5 MB
Plug-In windows	1:39	1.8 MB
Writing custom Plug-Ins with the PDK	3:25	3 MB
Other topics
ScopeLink™ Wizard	3:48 (min:sec)	2 MB
Repeat capture mode	2:48	1.5 MB
Searching	4:43	2.8 MB
I2C Searching	1:06	826 KB
SPI Searching	1:37	1 MB
RS232 Searching	1:35	945 KB
CAN Searching	2:24	1.3 MB
LIN Searching	2:07	1.3 MB
Bitstream Searching	1:09	800 KB
Filtering	2:18	1.2 MB
Exporting trace data	6:46	4.6 MB
Using bookmarks	2:54	1.7 MB
Disassemblers	7:05	5 MB
C/C++ Display and Trigger on Source	7:48	4.7 MB
Writing custom GoLogic apps with the SDK	8:20	6.3 MB

Home